Design Highlights: The valve is simply assembled with three detachable valve body parts by high strength bolts and nuts. With this design the valve can be very easily installed and disassembled any time, saving much more working time during production line construction, daily maintenance and repair. In case of damaged parts, it is no need to replace the whole valve, which can also save much repair cost. The manual handle can be pull type or gripper type. Pull handle type offers 4 gear, with which the valve can be opened in four stages to control flow rate. While the gripper handle type provides much wider adjust range with 12 gears for more accurate flow control. Specifications:

Standard	DIN,SMS,3A
Body Material	SS304 or SS316L
Seal Material	Silicon, EPDM, PTFE,Viton, NBR
Working Pressure(Max)	10 bar
Working Temperature (Max)	120 ℃
Size	1/2″ – 6″; DN15-DN150
Connection End	Weld
Surface Treatment	Inside Ra≥0.4-0.8 um; Outside: Mirror polish
Manual Handle	4 gear pull handle, or 12 gear gripper handle

Product Show：